dmesg - Intel Xeon E3-1578L v5
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-693.17.1.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Thu Jan 25 20:13:58 UTC 2018
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000100-0x0000000000098bff] usable
BIOS-e820: [mem 0x0000000000098c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007668efff] usable
BIOS-e820: [mem 0x000000007668f000-0x000000007668ffff] ACPI NVS
BIOS-e820: [mem 0x0000000076690000-0x00000000766d9fff] reserved
BIOS-e820: [mem 0x00000000766da000-0x000000007a39dfff] usable
BIOS-e820: [mem 0x000000007a39e000-0x000000007a72bfff] reserved
BIOS-e820: [mem 0x000000007a72c000-0x000000007a918fff] usable
BIOS-e820: [mem 0x000000007a919000-0x000000007b090fff] ACPI NVS
BIOS-e820: [mem 0x000000007b091000-0x000000007d2fefff] reserved
BIOS-e820: [mem 0x000000007d2ff000-0x000000007d2fffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Supermicro MBI-6219G-T7LX-PACK/B2SS2-MTF, BIOS 1.2 05/23/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007E000000 mask 7FFE000000 uncachable
2 base 007D800000 mask 7FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x407050600070106, new 0x7010600070106
x2apic enabled by BIOS, switching to x2apic ops
e820: last_pfn = 0x7d300 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc60-0x000fcc6f] mapped at [ffff8800000fcc60]
Base memory trampoline at [ffff880000082000] 82000 size 24576
Using GB pages for direct mapping
BRK [0x87f9fb000, 0x87f9fbfff] PGTABLE
BRK [0x87f9fc000, 0x87f9fcfff] PGTABLE
BRK [0x87f9fd000, 0x87f9fdfff] PGTABLE
BRK [0x87f9fe000, 0x87f9fefff] PGTABLE
BRK [0x87f9ff000, 0x87f9fffff] PGTABLE
BRK [0x87fa00000, 0x87fa00fff] PGTABLE
BRK [0x87fa01000, 0x87fa01fff] PGTABLE
BRK [0x87fa02000, 0x87fa02fff] PGTABLE
BRK [0x87fa03000, 0x87fa03fff] PGTABLE
RAMDISK: [mem 0x87c36c000-0x87e9fffff]
Early table checksum verification disabled
ACPI: RSDP 00000000000f05b0 00024 (v02 SUPERM)
ACPI: XSDT 000000007b0230b0 000DC (v01 SUPERM SUPERM 01072009 AMI 00010013)
ACPI: FACP 000000007b045cb8 0010C (v05 01072009 AMI 00010013)
ACPI: DSDT 000000007b023220 22A95 (v02 SUPERM SMCI--MB 01072009 INTL 20120913)
ACPI: FACS 000000007b08ff80 00040
ACPI: APIC 000000007b045dc8 000BC (v03 01072009 AMI 00010013)
ACPI: FPDT 000000007b045e88 00044 (v01 01072009 AMI 00010013)
ACPI: FIDT 000000007b045ed0 0009C (v01 01072009 AMI 00010013)
ACPI: SPMI 000000007b045f70 00041 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: MCFG 000000007b045fb8 0003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: HPET 000000007b045ff8 00038 (v01 SUPERM SMCI--MB 01072009 AMI. 0005000B)
ACPI: LPIT 000000007b046030 00094 (v01 INTEL GNLR 00000000 MSFT 0000005F)
ACPI: SSDT 000000007b0460c8 00248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 000000007b046310 02BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 000000007b048ec0 00BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 000000007b049aa8 00034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 000000007b049ae0 00054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 000000007b049b38 00610 (v02 INTEL xh_Zumba 00000000 INTL 20120913)
ACPI: PRAD 000000007b04a148 000CA (v02 PRADID PRADTID 00000001 INTL 20120913)
ACPI: SSDT 000000007b04a218 0547E (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 000000007b04f698 00042 (v01 00000000 00000000)
ACPI: SSDT 000000007b04f6e0 00E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: DMAR 000000007b050558 000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: EINJ 000000007b050600 00130 (v01 AMI AMI.EINJ 00000000 AMI. 00000000)
ACPI: ERST 000000007b050730 00230 (v01 AMIER AMI.ERST 00000000 AMI. 00000000)
ACPI: BERT 000000007b050960 00030 (v01 AMI AMI.BERT 00000000 AMI. 00000000)
ACPI: HEST 000000007b050990 0027C (v01 AMI AMI.HEST 00000000 AMI. 00000000)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to cluster x2apic.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
NODE_DATA(0) allocated [mem 0x87ffd9000-0x87fffffff]
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x87fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00097fff]
node 0: [mem 0x00100000-0x7668efff]
node 0: [mem 0x766da000-0x7a39dfff]
node 0: [mem 0x7a72c000-0x7a918fff]
node 0: [mem 0x7d2ff000-0x7d2fffff]
node 0: [mem 0x100000000-0x87fffffff]
Initmem setup node 0 [mem 0x00001000-0x87fffffff]
On node 0 totalpages: 8365272
DMA zone: 64 pages used for memmap
DMA zone: 37 pages reserved
DMA zone: 3991 pages, LIFO batch:0
DMA32 zone: 7766 pages used for memmap
DMA32 zone: 496961 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7668f000-0x7668ffff]
PM: Registered nosave memory: [mem 0x76690000-0x766d9fff]
PM: Registered nosave memory: [mem 0x7a39e000-0x7a72bfff]
PM: Registered nosave memory: [mem 0x7a919000-0x7b090fff]
PM: Registered nosave memory: [mem 0x7b091000-0x7d2fefff]
PM: Registered nosave memory: [mem 0x7d300000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7d300000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 35 pages/cpu @ffff88087fc00000 s104536 r8192 d30632 u262144
pcpu-alloc: s104536 r8192 d30632 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8234525
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040
x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040
xsave: enabled xstate_bv 0x1f, cntxt size 0x440 using standard form
Memory: 4035244k/35651584k available (6916k kernel code, 2190496k absent, 647948k reserved, 4551k data, 1800k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
x86/pti: Unmapping kernel while in userspace
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
NR_IRQS:327936 nr_irqs:488 0
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS1] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Detected 2000.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.00 BogoMIPS (lpj=1992000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
FEATURE SPEC_CTRL Present
FEATURE IBPB_SUPPORT Present
mce: CPU supports 11 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 26618 entries in 104 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007a483000 end: 0x0000007a4a2fff
DMAR: RMRR base: 0x0000007d800000 end: 0x0000007fffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: IRQ remapping was enabled on dmar0 but we are not in kdump mode
DMAR-IR: Failed to copy IR table for dmar0 from previous kernel
DMAR-IR: IRQ remapping was enabled on dmar1 but we are not in kdump mode
DMAR-IR: Failed to copy IR table for dmar1 from previous kernel
DMAR-IR: Enabled IRQ remapping in x2apic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1578L v5 @ 2.00GHz (fam: 06, model: 5e, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (31872.00 BogoMIPS)
node 0 initialised, 7194474 pages in 88ms
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7668f000-0x7668ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7a919000-0x7b090fff] (7831552 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 10:41:38, date: 10/12/18
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 24 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD (null) 000CA (v02 PRADID PRADTID 00000001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88087c352800 004BC (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88087fa2cc00 0037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88087c353000 005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff88087fbe5e00 00119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Enabling Firmware First mode for corrected errors.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 11.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 12.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 13.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 14.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci 0000:00:00.0: [8086:1918] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.2: [8086:1909] type 01 class 0x060400
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:193d] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf200000-0xdf20ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf221000-0xdf221fff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf220000-0xdf220fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xdf21f000-0xdf21ffff 64bit]
pci 0000:00:16.1: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf210000-0xdf211fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf21e000-0xdf21e0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf21d000-0xdf21d7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf218000-0xdf21bfff]
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf21c000-0xdf21c0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:1581] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xd0800000-0xd0ffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xd1008000-0xd100ffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xdf180000-0xdf1fffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot
pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref]
pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR0 for 64 VFs)
pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs)
pci 0000:02:00.1: [8086:1581] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:02:00.1: reg 0x1c: [mem 0xd1000000-0xd1007fff 64bit pref]
pci 0000:02:00.1: reg 0x30: [mem 0xdf100000-0xdf17ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot
pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref]
pci 0000:02:00.1: VF(n) BAR0 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR0 for 64 VFs)
pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs)
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:01.2: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
pci 0000:00:01.2: bridge has subordinate 02 but max busn 03
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04-05]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:05:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:05:00.0: reg 0x14: [mem 0xdf000000-0xdf01ffff]
pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe07f]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [io 0xe000-0xefff]
pci 0000:04:00.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:1d.0: PCI bridge to [bus 06]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
ACPI: Enabled 6 GPEs in block 00 to 7F
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00098c00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7668f000-0x77ffffff]
e820: reserve RAM buffer [mem 0x7a39e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a919000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7d300000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x0a10-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] could not be reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0xff00-0xfffe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: BAR 7: no space for [mem size 0x00400000 64bit pref]
pci 0000:02:00.0: BAR 7: failed to assign [mem size 0x00400000 64bit pref]
pci 0000:02:00.1: BAR 7: no space for [mem size 0x00400000 64bit pref]
pci 0000:02:00.1: BAR 7: failed to assign [mem size 0x00400000 64bit pref]
pci 0000:02:00.0: BAR 10: no space for [mem size 0x00100000 64bit pref]
pci 0000:02:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit pref]
pci 0000:02:00.1: BAR 10: no space for [mem size 0x00100000 64bit pref]
pci 0000:02:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit pref]
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:01.2: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [io 0xe000-0xefff]
pci 0000:04:00.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:1c.4: PCI bridge to [bus 04-05]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:1d.0: PCI bridge to [bus 06]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xde000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:05:00.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 39504k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7268f000-0x7668f000] (64MB) mapped at [ffff88007268f000-ffff88007668efff]
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
sha1_ssse3: Using AVX2 optimized SHA-1 implementation
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1539340897.264:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
pcieport 0000:00:01.2: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
pcieport 0000:00:1d.0: irq 30 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.2: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1d.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x5E
intel_idle: state C8-SKL is disabled
intel_idle: state C9-SKL is disabled
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:02: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-693.17.1.el7.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-693.17.1.el7.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 1991.999 MHz
i8042: No controller found
Switched to clocksource tsc
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
intel_pstate: HWP enabled
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x506e3, pf=0x10, revision=0xc6
microcode: CPU1 sig=0x506e3, pf=0x10, revision=0xc6
microcode: CPU2 sig=0x506e3, pf=0x10, revision=0xc6
microcode: CPU3 sig=0x506e3, pf=0x10, revision=0xc6
microcode: CPU4 sig=0x506e3, pf=0x10, revision=0xc6
microcode: CPU5 sig=0x506e3, pf=0x10, revision=0xc6
microcode: CPU6 sig=0x506e3, pf=0x10, revision=0xc6
microcode: CPU7 sig=0x506e3, pf=0x10, revision=0xc6
microcode: Microcode Update Driver: v2.01 , Peter Oruba
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 506c6868809d2cbf540bf0d983d5c6709dbc4f22'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 6:119:679
rtc_cmos 00:05: setting system clock to 2018-10-12 10:41:41 UTC (1539340901)
Freeing unused kernel memory: 1800k freed
random: systemd: uninitialized urandom read (16 bytes read)
usb 1-13: new high-speed USB device number 2 using xhci_hcd
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Initializing machine ID from random generator.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
usb 1-13: New USB device found, idVendor=0000, idProduct=0001
usb 1-13: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-13:1.0: USB hub found
hub 1-13:1.0: 4 ports detected
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Starting Paths.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Started Journal Service.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
usb 1-13.1: new low-speed USB device number 3 using xhci_hcd
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
usb 1-13.1: New USB device found, idVendor=0557, idProduct=2419
usb 1-13.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.0/input/input3
hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-13.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/input/input4
pps_core: LinuxPPS API ver. 1 registered
hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-13.1/input1
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
libata version 3.00 loaded.
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: irq 32 for MSI/MSI-X
i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.6.27-k
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf21d000 port 0xdf21d100 irq 32
ata2: SATA max UDMA/133 abar m2048@0xdf21d000 port 0xdf21d180 irq 32
ata3: SATA max UDMA/133 abar m2048@0xdf21d000 port 0xdf21d200 irq 32
ata4: SATA max UDMA/133 abar m2048@0xdf21d000 port 0xdf21d280 irq 32
ata5: SATA max UDMA/133 abar m2048@0xdf21d000 port 0xdf21d300 irq 32
ata6: SATA max UDMA/133 abar m2048@0xdf21d000 port 0xdf21d380 irq 32
ata7: SATA max UDMA/133 abar m2048@0xdf21d000 port 0xdf21d400 irq 32
ata8: SATA max UDMA/133 abar m2048@0xdf21d000 port 0xdf21d480 irq 32
i40e: Copyright (c) 2013 - 2014 Intel Corporation.
i40e 0000:02:00.0: fw 6.0.48442 api 1.7 nvm 6.01 0x80003496 1.1747.0
i40e 0000:02:00.0: The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.
i40e 0000:02:00.0: MAC address: ac:1f:6b:2c:e8:76
i40e 0000:02:00.0: irq 33 for MSI/MSI-X
i40e 0000:02:00.0: irq 34 for MSI/MSI-X
i40e 0000:02:00.0: irq 35 for MSI/MSI-X
i40e 0000:02:00.0: irq 36 for MSI/MSI-X
i40e 0000:02:00.0: irq 37 for MSI/MSI-X
i40e 0000:02:00.0: irq 38 for MSI/MSI-X
i40e 0000:02:00.0: irq 39 for MSI/MSI-X
i40e 0000:02:00.0: irq 40 for MSI/MSI-X
i40e 0000:02:00.0: irq 41 for MSI/MSI-X
i40e 0000:02:00.0: irq 42 for MSI/MSI-X
i40e 0000:02:00.0: irq 43 for MSI/MSI-X
i40e 0000:02:00.0: irq 44 for MSI/MSI-X
i40e 0000:02:00.0: irq 45 for MSI/MSI-X
i40e 0000:02:00.0: irq 46 for MSI/MSI-X
i40e 0000:02:00.0: irq 47 for MSI/MSI-X
i40e 0000:02:00.0: irq 48 for MSI/MSI-X
i40e 0000:02:00.0: irq 49 for MSI/MSI-X
i40e 0000:02:00.0: irq 50 for MSI/MSI-X
i40e 0000:02:00.0: i40e_ptp_init: PTP not supported on eth0
i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width x4
i40e 0000:02:00.0: PCI-Express bandwidth available for this device may be insufficient for optimal performance.
i40e 0000:02:00.0: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.
i40e 0000:02:00.0: Features: PF-id[0] VFs: 64 VSIs: 66 QP: 8 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve VEPA
i40e 0000:02:00.1: fw 6.0.48442 api 1.7 nvm 6.01 0x80003496 1.1747.0
i40e 0000:02:00.1: The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata4.00: ATA-10: Micron_5100_MTFDDAK240TCB, D0MU037, max UDMA/133
ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Micron_5100_MTFD U037 PQ: 0 ANSI: 5
i40e 0000:02:00.1: MAC address: ac:1f:6b:2c:e8:77
i40e 0000:02:00.1: irq 51 for MSI/MSI-X
i40e 0000:02:00.1: irq 52 for MSI/MSI-X
i40e 0000:02:00.1: irq 53 for MSI/MSI-X
i40e 0000:02:00.1: irq 54 for MSI/MSI-X
i40e 0000:02:00.1: irq 55 for MSI/MSI-X
i40e 0000:02:00.1: irq 56 for MSI/MSI-X
i40e 0000:02:00.1: irq 57 for MSI/MSI-X
i40e 0000:02:00.1: irq 58 for MSI/MSI-X
i40e 0000:02:00.1: irq 59 for MSI/MSI-X
i40e 0000:02:00.1: irq 60 for MSI/MSI-X
i40e 0000:02:00.1: irq 61 for MSI/MSI-X
i40e 0000:02:00.1: irq 62 for MSI/MSI-X
i40e 0000:02:00.1: irq 63 for MSI/MSI-X
i40e 0000:02:00.1: irq 64 for MSI/MSI-X
i40e 0000:02:00.1: irq 65 for MSI/MSI-X
i40e 0000:02:00.1: irq 66 for MSI/MSI-X
i40e 0000:02:00.1: irq 67 for MSI/MSI-X
i40e 0000:02:00.1: irq 68 for MSI/MSI-X
i40e 0000:02:00.1: i40e_ptp_init: PTP not supported on eth1
i40e 0000:02:00.1: PCI-Express: Speed 8.0GT/s Width x4
i40e 0000:02:00.1: PCI-Express bandwidth available for this device may be insufficient for optimal performance.
i40e 0000:02:00.1: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.
i40e 0000:02:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 8 RSS FD_ATR FD_SB NTUPLE DCB VxLAN Geneve VEPA
ata4.00: Enabling discard_zeroes_data
sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3
ata4.00: Enabling discard_zeroes_data
sd 3:0:0:0: [sda] Attached SCSI disk
random: fast init done
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[162]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1539340903.825:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
TCP: westwood registered
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd-journald[435]: Received request to flush runtime journal from PID 1
type=1305 audit(1539340904.416:3): audit_pid=508 old=0 auid=4294967295 ses=4294967295 res=1
ipmi message handler version 39.2
ipmi device interface
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
acpi device:10: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
sd 3:0:0:0: Attached scsi generic sg0 type 0
random: crng init done
ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
input: PC Speaker as /devices/platform/pcspkr/input/input6
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[drm] Initialized
mei_me 0000:00:16.1: Device doesn't have valid ME Interface
AES CTR mode by8 optimization enabled
Adding 1996796k swap on /dev/sda2. Priority:-1 extents:1 across:1996796k SSFS
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
alg: No test for crc32 (crc32-pclmul)
[drm] Using P2A bridge for configuration
[drm] AST 2400 detected
[drm] Analog VGA only
[drm] dram 1632000000 1 16 01000000
[TTM] Zone kernel: Available graphics memory: 16427234 kiB
ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0951, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: astdrmfb (fb0) is primary device
IPMI SSIF Interface driver
Console: switching to colour frame buffer device 128x48
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ast 0000:05:00.0: fb0: astdrmfb frame buffer device
[drm] Found 128MB of eDRAM
[drm] Memory usable by graphics device = 4096M
[drm] Replacing VGA console driver
[drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0x7e000000 - 0x80000000]
[drm] Initialized ast 0.1.0 20120228 for 0000:05:00.0 on minor 0
i915 0000:00:02.0: irq 69 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm:gen9_set_dc_state [i915]] *ERROR* DC state mismatch (0x0 -> 0x2)
[drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
lacp_rate param is irrelevant in mode transmit load balancing
MII link monitoring set to 100 ms
Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-bond0 instead.
bond0: Setting MII monitoring interval to 100
bond0: Note: Updating updelay (to 200) since it is a multiple of the miimon value
bond0: Note: Updating downdelay (to 200) since it is a multiple of the miimon value
bond0: Setting down delay to 200
bond0: Setting up delay to 200
IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
i40e 0000:02:00.0 eno1: already using mac address ac:1f:6b:2c:e8:76
bond0: Setting MII monitoring interval to 100
bond0: Note: Updating updelay (to 200) since it is a multiple of the miimon value
bond0: Note: Updating downdelay (to 200) since it is a multiple of the miimon value
bond0: Setting down delay to 200
bond0: Setting up delay to 200
bond0: Adding slave eno1
i40e 0000:02:00.0 eno1: already using mac address ac:1f:6b:2c:e8:76
i40e 0000:02:00.0 eno1: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
bond0: Enslaving eno1 as an active interface with an up link
IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
bond0: link status definitely up for interface eno1, 10000 Mbps full duplex
bond0: making interface eno1 the new active one
i40e 0000:02:00.0 eno1: already using mac address ac:1f:6b:2c:e8:76
bond0: first active interface up!
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[drm] failed to retrieve link info, disabling eDP
[drm] GuC firmware load skipped
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 1
[drm] Cannot find any crtc or sizes - going 1024x768
i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
[drm] RC6 on
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
i40e 0000:02:00.0 eno1: already using mac address ac:1f:6b:2c:e8:76
i40e 0000:02:00.0 eno1: already using mac address ac:1f:6b:2c:e8:76
br0: port 1(tap0) entered blocking state
br0: port 1(tap0) entered disabled state
device tap0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
kvm [25753]: vcpu0 unhandled rdmsr: 0x140
kvm [25753]: vcpu0 disabled perfctr wrmsr: 0xc2 data 0xffff
br0: port 2(one-2-0) entered blocking state
br0: port 2(one-2-0) entered disabled state
device one-2-0 entered promiscuous mode
br0: port 2(one-2-0) entered blocking state
br0: port 2(one-2-0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
kvm [26668]: vcpu0 unhandled rdmsr: 0x140
kvm [26668]: vcpu0 disabled perfctr wrmsr: 0xc2 data 0xffff
br0: port 2(one-2-0) entered disabled state
device one-2-0 left promiscuous mode
br0: port 2(one-2-0) entered disabled state
br0: port 2(one-4-0) entered blocking state
br0: port 2(one-4-0) entered disabled state
device one-4-0 entered promiscuous mode
br0: port 2(one-4-0) entered blocking state
br0: port 2(one-4-0) entered forwarding state
kvm [28370]: vcpu0 unhandled rdmsr: 0x140
kvm [28370]: vcpu0 disabled perfctr wrmsr: 0xc2 data 0xffff
br0: port 2(one-4-0) entered disabled state
device one-4-0 left promiscuous mode
br0: port 2(one-4-0) entered disabled state
br0: port 2(one-4-0) entered blocking state
br0: port 2(one-4-0) entered disabled state
device one-4-0 entered promiscuous mode
br0: port 2(one-4-0) entered blocking state
br0: port 2(one-4-0) entered forwarding state
br0: port 2(one-4-0) entered disabled state
device one-4-0 left promiscuous mode
br0: port 2(one-4-0) entered disabled state